Plant and Tool Hire for Trade and DIY HAE Logo

Covid-19 Coronavirus – We are open!

After all the disruption caused by the Coronavirus Covid-19 pandemic I wanted to assure you that Didcot Plant is open for business and here for all your hiring needs.

There are, however, some practices and restrictions that we are following in the face of Coronavirus Covid-19.

Read our Covid-19 news article for full details »

News archive

News

The latest news from the world of Didcot Plant.

Check regularly for the latest announcements of additions to our hire fleet.

Don't forget that you can follow us on Facebook and Twitter.

Stihl TS410 Disc Cutters

The range of Stihl TS410 Disc Cutters available from Didcot PlantThe Stihl TS410 disc cutter is, in many people’s opinion (including ours), the Rolls Royce of petrol disc cutters and in 2019 we made sure we always had plenty of supply by adding ten new ones to our hire fleet.

The TS410 has a number of great standard features that makes it the industry favourite:

Detail of the engine on the Stihl TS410 Disc CutterReduced-emission engine technology

The 2-stroke engine with stratified charge results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Detail of the manual fuel pump on the Stihl TS410 Disc CutterManual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operation.

Detail of the water supply connection on the Stihl TS410 Disc CutterWater supply

Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.

Detail of the air filtration system on the Stihl TS410 Disc CutterPre-separation air filtration system

The Stihl long-life air filtration system with pre-separation achieves perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled then the larger, heavier particles are ejected before the pre-cleaned air is routed to the air filter via the pre-separator duct.

Detail of the anti-vibration system on the Stihl TS410 Disc CutterAnti-vibration system

To tackle problems caused by intense vibration at the handles of power tools Stihl has developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened significantl,y reducing vibrations at the handles.

Photo of the Stihl TS410 Disc Cutter showing the ergonomic grip positionErgonomic grip position

The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.

Detail of the semi-automatic drive belt tensioning control on the Stihl TS410 Disc CutterSemi-automatic drive belt tensioning

Light, consistent re-tensioning increases the service life of the belts and shaft bearings.

<< Back to News front page

 
Didcot Plant Ltd
Basil Hill Road
Didcot
Oxfordshire OX11 7HJ
Map & directions
tel: 01235 814000
email: info@didcotplant.co.uk
Follow Us

Switch to our mobile site