Description
Elite 2.8kW 230v Fan Heater. Heat output up to 9554 Btu. Dimensions 250mm (L) x 250mm (W) x 400mm (H). Weight 5.2kg. Noise level 49 dB(A). Rated current 11.66 Amp.
Safety Warning – Safe Use of Electric Heaters
When using multiple heaters from one supply please consider the following:
- Can the RFC (ring main) safely carry the load applied – consider other equipment loaded on the circuit - a maximum of no more than two heaters should be connected on a tested and safe 32A protected RFC (ring main).
- Is the RFC in good condition and adequately protected ideally with an RCD or RCBO.
- Do not leave heaters unattended whilst switched on.
- Ensure the outlet socket used is in good condition without defect.
- Prolonged use at maximum power is NOT recommended. After 8 hours in use, it is recommended to either switch off or set to fan only mode and allow to cool for a minimum of 1 hour.
- Do not operate heaters on timed circuits or with any timer accessories.
- If there is any doubt consult a qualified electrician.
