We now own a fleet of latest spec. compressors that we can rightly be proud of.

What Kubota say about their machine:

“Operate the KX71-3 mini-excavator’s control levers and you’ve got the most efficient, on-the-job performance within your hands. That’s because the KX71-3 delivers the largest digging depth and reach of all mini-excavators with a long arm in its weight category. Even with the long arm, it amazingly generates the largest power in its class for both arm and bucket digging. Furthermore, the KX71-3’s lifting power is so strong. Together with a host of robust features that complete the package, making the KX71-3 the stand-alone leader in performance.”

The Ingersoll Rand 7/41 is fitted with a ‘Tough Top’ polyethylene hood to reduce site damage and can provide up to 141cfm of compressed air at 7 bar (100psi).

The HRP50 6.25kVA petrol generator provides 5.0kW of power from its configuration of 2 no. 16 Amp 110v sockets and 2 no. 16 Amp 240v sockets. It has a Honda GX390 engine fitted with a 6.5 litre fuel tank that provides 3.27 hours of run time at 75% load.

The SKD60 6.0kVA super silenced diesel generator is fully canopied to comply with existing noise regulations. It provides 4.8kW of power from its configuration of 2 no. 16 Amp & 1 no. 32 Amp 110v sockets and 2 no. 16 Amp & 1 no. 32 Amp 240v sockets. Its Yanmar L100 electric start diesel engine is fitted with a 22 litre fuel tank that gives 18 hours of run time at 75% load.

The Kubota K008-3 offers good power output but in a portable machine that can get in to just about any site regardless of how tight the access is.

It can even go through most doorways due to its hydraulically adjustable tracks. When they are ‘in’ the overall width of the machine is just 750mm. In the ‘out’ position for working the K008 still only measures 860mm wide, making it the perfect choice when space is at a premium.

The K008 can dig to a depth of 1720mm and can be supplied with a range of buckets up to 24″.

For full details go to the 0.8-tonne mini excavator page in our catalogue.

This powerful hydraulic rotavator is built to handle testing ground conditions.

The Barreto 9HP is an all hydraulic pedestrian rear tine tiller. It weighs 200kg and is 600mm wide with a digging width of 400mm. It is ideal for mid sized areas and for hard ground. It has a tilling depth of 150mm and is fitted with a Honda 4-stroke petrol engine.

For full details go to the Barreto 9HP rotavator page in our catalogue.

We have been running this dumper in our fleet since 2004 and since day one it has been extremely popular. But when you consider its combination of size (just 1115mm wide) and load capacity (1 tonne), not forgetting the fact that it can load a skip, it is not hard to see why.

For full details go to the Thwaites 1 Tonne Hi-Tip page in our catalogue.

Demand for this site fencing solution is constant, so with the 2011 festival season approaching fast we wanted to make sure we were well prepared.

These anti-climb panels are joined using rubber feet and clips to give a good semi-permanent fencing solution to construction sites and events where security is an issue.

You can hire temporary fence panels from the temporary fence panels page in our hire catalogue.

The Garden Master Turf Cutter has been a popular part of our gardening equipment range since 2002, proving to be a capable and reliable bit of kit.

This 5.5hp machine has a 300mm cutting width and an adjustable cutting depth to 35mm. Enhancements on the latest model include:

• An extra forward gear
• Rear drive axle up-rated
• Improved depth gauge

Turf cutters can be hired from the turf cutter page in our hire catalogue.